SO3 - Screws Not Threading and other stuff
@WarrantUSN wrote: First, Hi everyone! Don here, longtime amateur woodworker and 3D terrain maker, upping my game with the SO3. I hope to tap into your experience and insight. Now, onto assembly...
View ArticleBroken link: http://carbide3d.com/nomad/feedandspeed/
@Griff wrote: Tried to access above link from here: http://carbide3d.com/docs/support/ and a few other places, all I get is: Shapeoko Speed and Feed Chart Shapeoko Feed and Speed Chart Just an FYI....
View ArticleClik here to view.
Diamond Drag Engraving Granite First Project
@TX_SGT wrote: This was my first attempt at drag engraving granite. I think it turned out rather nice. I was expecting it to dig a little deeper, but for the ease of using this spring loaded tool you...
View ArticleMotor Hum at Idle, Red/Green Blinking Light on Board - Normal Behavior?
@rkimberly wrote: Hi All. Just completed a new Shapeoko build. Machine appeared fine. X, Y, and Z jogged as instructed. But, after loading and successfully starting and stopping a simple design (no...
View ArticleHow to hook my VFD to my machine
@fiero1 wrote: So ive been searching and cant find a straight forward answer on how to hook up my VFD so that both speed and on/off can be controlled through CM.I know it has been done , right? Any...
View ArticleClik here to view.
Triquetra for sale
@atrueresistance wrote: I have a triquetra for sale with little use. $35 shipped US. IMG_20170624_203300.jpg3225x2419 2.11 MB IMG_20170624_203245.jpg2419x3225 2.26 MB Posts: 1 Participants: 1 Read...
View ArticleHelp sent /z22 in grbl now z is off
@chris06 wrote: I put /z 22 in grble in the midi and hit send thinking that would move z to 22 so I could measure for setup. Now when I click move .1" it moves around .2". What did I do and how do I...
View ArticleClik here to view.
Raspberry Pi3b with Windows 10 Lot Core for Carbide Create/Motion?
@YoMan wrote: Anybody played with these-I have been through the thread on using the RPi as a sever for a Shapeoko, But I have the following parts on order and hope to have it running my XXL with the...
View ArticleClik here to view.
Cursed Microsoft Updates
@Zoomer wrote: My Carbide Create and Carbide Motion were running just fine until an automatic update from Microsoft for my Windows 10 system was installed. Now I can run either program until I try to...
View ArticleFs: unopened VCarve Pro
@howellusn wrote: I acquired another Cnc and it came with an unopened copy of VCarve Pro that I don’t need so figured I would sell. $600 if anyone is interested Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
XL Supplemental Wasteboard
@mikep wrote: I made a supplemental wasteboard with lots of spots for threaded inserts, and a number of .25" dowel locations. Threaded inserts are on 1.5" centers. I chose this (and 10-24 inserts) to...
View ArticleZ axis belt fraying
@EllisE wrote: I am a noobie as well but have been able to make quite a few projects and my XXL has been performing well until 2 weeks ago. In the middle of a project the depth started to change mid...
View ArticleClik here to view.
Glass tile engraving
@TX_SGT wrote: Just got done doing some glass engraving for some customer project. Simple little project, but we sell them cheap, and it keeps me busy (and pays for my addiction to needing to learn...
View ArticleHole in free board
@bartok wrote: Hello every body.i would to know how to make a gride of hole, like in waste board but without cutting the exterior area.i wouldlike to know whit using meshcam an rhino 3d, because i...
View Article3rd Party Controller Homing Busted on Y
@johnelle wrote: I am in the middle of testing a 3rd party controller. I had it doing $H a few times but after an hour or so it got into a mode where it does the Z home and the X home as expected but...
View ArticleAdding Materials to the Job Setup Tab
@cnicho35 wrote: Hi everyone! First post here after a while of lurking. Sorry in advanced if this question has already been asked but I couldn't find an answer on these forums... So after using my...
View ArticleInaccurate positioning
@enl_public wrote: I am having an issue I haven't seen before. The key issue is locating holes for dowel pins to align a microscope stage. The spacing is specified as 70.000mm+/-0.050mm (3.00mm pins)....
View ArticleIntensive and long term with metal?
@steveraf wrote: I wouldLike to know your insights about longevity of the 883 used intensively to work with metal Is it reliable ? Thanks Posts: 2 Participants: 2 Read full topic
View ArticleControlling canned cycles and retraction height
@cnicho35 wrote: Hey everyone! So I'm using the nomad and I was wondering if there was a way to control what type of canned cycle the gcode generator is using for bores/slots. After playing around...
View ArticleHow to know when your 611 router is gone
@irr1449 wrote: I've been using my machine for about a year. I use it quite a bit, definitely a few times a week. I'm sure I have well over 100 hours on the router. I've a bunch of jobs with 1/8 bit...
View Article