Selling used Nomad
@oliverblum wrote: Hi, I want to sell my Nomad with Bamboo siding, it has about 30h of use. Its in perfect working condition and I have the original box for shipping too. Also comes with the low...
View ArticleGood, flexible material for cutting stencils?
@Griff wrote: I've been requested to attempt to cut some "company logo" stencils. Thought I'd ask the community what materials might be used to create re-usable, flexible stencils? 1/8" HDPE, aluminum...
View ArticleClik here to view.
Carbide Motion 408 out?
@patofoto wrote: The link to update not working for me. Anyone else? Screen Shot 2017-06-20 at 12.57.15 PM.png2008x1242 77.7 KB Posts: 2 Participants: 1 Read full topic
View ArticleWhat's new in Cabide Create beta 290?
@popscustomclips wrote: Can anyone tell me what enhancements or fixes are in CC Beta 290? Thanks,John Posts: 2 Participants: 2 Read full topic
View ArticleWanting to Engrave into Leather
@j_hurst wrote: How hard/easy is using the nomad 883 to engrave into leather. Like letters or what not into the leather. Posts: 1 Participants: 1 Read full topic
View ArticleMore efficent tool paths in CC
@lordhelemt wrote: Am I able to assign the order objects are cut within a group in a single tool path? For example I needed to cut a 10x10 matrix of 8mm holes. When I ran the program it would cut each...
View ArticleIdeas for things to do to impress my boss
@j_hurst wrote: Im looking for things to do. My boss isn't really happy with the things I have been doing so I am looking for things to do, What would be some simple cool things to do. I have the 883...
View ArticleTool Library discrepancies in CC 290
@PhilG wrote: Pick on CC week? In the middle of transitioning to F360 and I thought it would be useful to move (some) of the default feeds and speeds for the mills calculated in CC for various...
View ArticleG-code viewing- How
@mherynk wrote: How can I see the g-code? I can't open it in a text editor it just show gobledy-gook unlike the nice clean files I see other people posting. Posts: 3 Participants: 2 Read full topic
View ArticleClik here to view.
Testing out Carbide Copper
@tchad wrote: I finally got around to running a test cut using Carbide Copper on my Shapeoko 3 today, and I thought I'd post some pictures and a few notes. IMG_7422.JPG2757x1646 666 KB...
View ArticleNoobie cut file confirmation algorithm
@grumpa wrote: After calibrating and finding my Z axis is within o.3 degrees off vertical, I decided that cutting a full complex project is higher priority than perfection vertical, because I don't...
View ArticleWaste board question
@lordhelemt wrote: Now that my machine is calibrate I'm looking to modify the waste board next. Does anyone have a strong opinion on adding threaded inserts to the original waste board? Or layering a...
View ArticleCC290 bug? And also some letters to make this 15 characters
@ItsDan wrote: I was adjusting the settings for a pocket operation and adjusted the stepover value. Any time I open the tool settings subsequently it reverts to the CC calculated value for the...
View ArticleClik here to view.
Material left inside carving, not certain what to adjust
@ItsDan wrote: Photo Jun 22, 9 39 35 PM.jpg2448x3264 926 KB Carving with a 1/16" square endmill and I'm getting these small pockets of uncut material. It happens on most of the copies of this though...
View ArticleClik here to view.
Replacing Pulley Set Screws
@patonclover wrote: Right from initial assembly I have felt pretty uneasy about the fine pulley set screws in my 3XL. It wasn't the screws that bothered me but the fine hex key required to tighten...
View ArticleNew instructions are up
@WillAdams wrote: Docs got updated. http://docs.carbide3d.com/assembly/shapeoko/s3/ http://docs.carbide3d.com/assembly/shapeoko/xl/ http://docs.carbide3d.com/assembly/shapeoko/xxl/ Haven't had a...
View ArticleCarbide Create Not Showing Simulation for Small Pocket Cuts
@chuckanut wrote: I have tried .dxl, creating paths with Carbide Create circle tools, and I even tried svg. I can't get the simulation to show up on the small holes. I am going to run the G code on...
View ArticleHow to get a new job to load to the center of my workspace in Carbide Create
@Zoomer wrote: How can I get a new job to load to the center of work space? In other words, if my stock size is assigned to 6" x 6" and the SVG file measures something less, how can I make it to load...
View ArticleFor Sale: (Like New) Nomad 883 Pro, Bamboo w/Vice, Threaded Table, etc
@RMStudios wrote: Hello. I'm looking for a buyer to make good use of my Nomad 883 Pro with bamboo siding, vice, threaded table and a set of bits. It was run for about 4 hours before my reason for...
View ArticleClik here to view.
Quitting a Job Halfway Through and Restarting Later
@chendreid wrote: Hi There, I have a bit of a unique situation here. Please excuse my ignorance, I am fairly new to CNC. Today I was running a complex 3D job on my nomad and working on another project...
View Article