XL Supplemental Wasteboard

@mikep wrote:

I made a supplemental wasteboard with lots of spots for threaded inserts, and a number of .25" dowel locations. Threaded inserts are on 1.5" centers. I chose this (and 10-24 inserts) to be able to reuse some other tooling.
For me, having a place to stick dowels makes getting stock aligned against the machine axis quick and easy. You can align this board to the machine using dowels stuck into the same holes from the underside and placing them hard up against the front of the machine.

Tooling-plate-mdf-shapeokoxl v9.png2802x1086 1.09 MB

Here are the fusion360 files:
https://grabcad.com/library/threaded-so3-xl-wasteboard-1

Set up for these inserts:

Posts: 3

Participants: 2

Read full topic