Changing bits during a job
@Radiation wrote: Hello! Newer Shapeoko user. I’ve been able to run a few jobs successfully that only required one bit for the job from F360. I’m now trying to do a rough cut/finish pass with...
View ArticleClik here to view.
Combination of Poket cut Raised & V-Carve CNC op. Using only CC
@DIY_creator70 wrote: Solid Press. Treated pine board 11 3/4” X 31” Cutters ———- .063 - Square for windshields and Pilot .200 depth 0.125 - for rear windows also .200 depth. 0.250 - for Aircraft...
View ArticleLooking to to buy vcarve pro from someone
@classic1931 wrote: I’m trying to buy vcarve pro Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Can’t find a drawer pull made from hickory...make one on your SO3
@Griff wrote: I was wandering around my favorite hardwood supplier last week, nothing in particular in mind, just looking for something interesting to inspire me. I found some 4/4 “rustic hickory” and...
View ArticleSelling a virtually new Shapeoko 3 and lots of accessories
@smendlik wrote: I’ve decided to sell my Shapeoko 3 since I just don’t have time to use it. Everything is unused or with very little use. The unit has about 3 hours of time on it and only a couple of...
View ArticleSVG Import Dropts Text
@stringhunter wrote: I am a brand new user, so please forgive what is probably a very simple question but I have created a logo file in Illustrator and saved it as an SVG. When I open the file in...
View ArticleClik here to view.
First go with a Vee bit
@Mysteryck386 wrote: 20180527_113702.jpg1385x2851 1.16 MB Posts: 1 Participants: 1 Read full topic
View ArticleSlipping, new problem
@spasmfingers wrote: My machine is now slipping on materials I’ve worked before, with the same feeds and speeds and bit as I have previously used. I think I might have damaged some part by pushing it...
View ArticleDoing some maintenance...need some input
@mikep wrote: I need to replace a couple wheels, looking to upgrade while I’m at it if it makes sense. I’ve found delrin v-wheels, polycarbonate, and aluminum. Is there any actual benefit to the...
View ArticleContemplating getting an Nomad 883 Pro for PCB carving specifically
@KikoLobo wrote: Hi All, I am looking for a super reliable machine that can be used to carve dual side PCBs specifically. I am between the Bantam Tools (used to be Othermill) and the Nomad 833. I am...
View ArticleUsing metal-purposed endmills for wood
@crew wrote: It is hard to come by endmills for wood where I am at as most say thery are for aluminum, etc. Are there any downsides to using such endmills for wood projects? Or is it a matter of...
View ArticleLooking to buy VCarve Pro for cheap
@classic1931 wrote: I have limited money but i need VCarve Pro for some projects coming up. If anyone has a key let me know. Posts: 2 Participants: 2 Read full topic
View ArticleEngraving Script Fonts using Vee Carving
@christybranham wrote: I have a Nomad, and am attempting to engrave some script fonts using a vee bit. I am a jeweler, so my work and the size of the font is fairly small. Here is my issue: I can get...
View ArticleClik here to view.
Tutorial: Calibrating axis belt stretch on SO3 with a caliper
@mikep wrote: Seems like a fair number of people have trouble with belt calibration, so here’s another shot at a tutorial using a different method. You need a digital caliper (at least 6"), some...
View ArticleConsidering upgrading my z-axis
@DCFYI wrote: Hello carbide community. I am considering upgrading the OEM z axis to the CNC4Newbes’ Shapeoko 3 Slider and was wondering if anyone here in the community has tried this product? Would...
View ArticleVectric VCarve Post Processor For Nomad 883 Pro
@christybranham wrote: Okay, after my previous post today, I am considering buying Vectric VCarve. What is the correct post proccessor to use so that the gcode is able to be read by Carbide Motion?...
View ArticleWhat the... ? Spindle is moving?
@BKJ wrote: The spindle on my NOMADS 883 Pro is moving up and down!!! I was wondering why it wasn’t cutting correctly and when I went to change bits I noticed the the spindle moves up and down by...
View ArticleClik here to view.
Looking to sell my linear Z upgrade
@MrBeaver wrote: Morning all I’m looking to sell my linear Z upgrade I now have a spare I no longer need which has seen light use. Similar to that of the CNC newbie one, it’s my own take on it....
View ArticleLooking at bringing a new Z axis to market
@MrBeaver wrote: Good morning all I spent quite a bit of time designing and building the upgraded Z axis, but feel it’s such an improvement I’d like others in the community to benefit. Following on...
View ArticleClik here to view.
Syntax Error from Vectric on Nomad
@christybranham wrote: Purchased and started using Vectric VCarve Desktop. I did install the post processor for the Nomad. Went to load and test cut a file this morning and got the attached error....
View Article