Clik here to view.
Engraving Acrylic - Best End Mills?
@Savant_PCs wrote: Hey all. I am making these little items out of clear acrylic that have a motion activated fluid inside of them. Long story short I am getting requests to get logoās and words...
View Article90 degree Amana bit vibrating like crazy
@Stari wrote: Wondering if this is normal. Finally got to use my new Amana bit last night. Usually the machine is pretty quiet but when I put this bit on it immediatly had a ton of vibration and was...
View ArticleClik here to view.
Flower girl gift box
@MaxamillionX72 wrote: My cousin is getting married and wanted a small gift box for her flower girl, a 5 year old who loves fairies. This is what I came up with. Used a 3/4" bottom cleaning bit, 1/8"...
View ArticleXXL Storage and Heat
@millerasm wrote: so i just bought my XXL and im super happy right now, my concern is i use it in my garage and right now the temp is a 105 degrees out side, so that make my garage even hotter about...
View ArticleClik here to view.
Best bit for engraving
@Jbeachy wrote: I have started engraving catch all trays that have made on my XL. I used a 60 degree bit to do that last engraving and was wondering if a 1/16 or 1/8 ball nose endmill would do a...
View ArticleClik here to view.
How would I do this? If someone can help me step by step?
@beaaholic wrote: I have the Nomad here and am slowly learning. But I am a newbie. Anyway, my idea at the moment is to make acrylic dies that I would us on my big hydraulic press to form metal into...
View ArticleClik here to view.
Flatten a 3D model to get DXF template
@nick wrote: I have a design for a longboard deck that I intend to make but I need a way of producing an accurate template that I can print to cut the shape out once the shape has been formed in a...
View ArticleOrnamentation scroll
@Blackwoodwork wrote: Does any one know of a program or were to get a program for ornamentation scroll work. Posts: 5 Participants: 3 Read full topic
View ArticleMake monogram letter with circle arund it
@Asdueitt wrote: S with circle around it.c2d (90.7 KB) I am trying to tie this S and the circle can some one help me? Posts: 2 Participants: 2 Read full topic
View ArticleClik here to view.
First Project - Clamp Support
@scottybeefs wrote: Hi everyone, after putting my XXL together and a couple of quick tests Iāve just tackled my first design and cut project. Being a total newbie to CNC itās been a good learning...
View ArticleBeyond terrific service
@jerry wrote: While getting ready for a summer digital woodworking workshop at the Mark Adams School of Woodworking (Tim Celiski Digital Woodworking) a small piece of 2" oak came loose from its double...
View ArticleClik here to view.
New PC Build - All custom parts made with Shapeoko 3
@Savant_PCs wrote: I just wanted to share the new PC I built for a friend/customer. I did a custom water cooling loop with custom parts I designed and made using the Shapeoko 3 XXL. This build was...
View ArticleShapeoko 3 Not Connecting to cutter
@Jmcwoodworking wrote: I just finished assembling my Shapeoko 3. When I power it up and try to connect to it via Carbide Motion, I receive an error message that Cutter is not connected. All cables are...
View ArticleIs there a proper sequence of starting your Shapeoko
@classic1931 wrote: I got my Shapeoko like 2 months ago and every time I use it I have to take the cover plate off and push the restart button. I start my pc Plug the Shapeoko usb in the pc Turn on...
View ArticleClik here to view.
I'm really enjoying my new machine š
@Mysteryck386 wrote: 20180601_160819.jpg1385x2851 1.03 MB Posts: 1 Participants: 1 Read full topic
View ArticleLooking to buy a used Nomad 883 Pro
@soamv wrote: Hi all, Iām looking to buy a used Nomad 883 Pro, if anyone has one to sell. Iām in the SF bay area, Iād prefer buying more or less locally, if possible. Thanks! Posts: 1 Participants: 1...
View ArticleClik here to view.
LattePanda and Carbide Motion
@DCFYI wrote: Thinking about picking up a LattePanda to run Carbide Motion in the shop. Anyone know if LattePanda specs are sutable to run carbide creat. DFR0544-900x600.jpg900x600 33.7 KB DFR0432-PCB...
View ArticleClik here to view.
Inlay Problem using Carbide Create
@Phil wrote: I am having problems when using Carbide Create to design inlay elements and the pockets that they fit into. The inlays are small and complex shapes with both internal and external...
View ArticleBlue Wax Issues
@christybranham wrote: Hi there, Finally have the engraving issues worked out. Now working on holding things down. I engrave first with an engraving bit, and then cut with a tiny endmill. The tape is...
View ArticleClik here to view.
Tapered bit in g-wizard
@MaxamillionX72 wrote: Trying to figure out how to enter a tapered bit into G-wizard to figure out feeds & speeds, and Iām getting really weird results no matter how I try. I sent two emails to...
View Article