Breakouts to allow for external stepper drivers on PCB
@andyv117 wrote: Break out the GND DIR STEP ENABLE pins on the PCB to allow people the flexibility to add a gecko or other external stepper to the axis. Posts: 1 Participants: 1 Read full topic
View ArticleOfficial Screw driven Z-Axis
@andyv117 wrote: Official option for a screw driven Z-Axis. This will make it easier to mill metal and to use heavier routers / spindles Posts: 1 Participants: 1 Read full topic
View ArticleHow to Toggle Homing On/Off
@wingrider62 wrote: Anyone know how to toggle the homing sequence on / off in the latest version of Carbide Motion. I recently upgraded CM & Firmware and have been running for a while and today...
View ArticleCant home machine
@Blackjack wrote: Ok used the XXL on Friday ran a bunch of jobs no problem at all. Today fired up the machine secure my stock go to home machine and when it arrives at the back right it for the homing...
View ArticleBrand new XXL but getting GBRL error
@millerasm wrote: just got all the parts in for my SO3 XXL, controller was on back order and came on friday. assembly went smooth. but ive been at it for the last 2 nights trying to get this this to...
View ArticleClik here to view.
The first Project for my XXL
@scottybeefs wrote: A cubby from the packaging for the little man! I can provide plans if any one requires… image.jpeg4032x3024 1.78 MB Posts: 1 Participants: 1 Read full topic
View ArticleDimensions of Shapeoko XXL
@swerly01 wrote: I just purchased a Shapeoko XXL I’m super excited! I’m new to CNC and wood working honestly. I’ve done little projects and things, but i’m wanting to build a table for it before it...
View ArticleClik here to view.
MeshCAM V7 Pop-up Windows Blank (MAC)
@VikingCO wrote: Background: I was having the same issue with OS Sierra as many experienced back in '16, in that the program crashes when starting the finishing g code calculations. It seems like...
View ArticleDesigning parts to fit inside other parts
@MaxamillionX72 wrote: Had a little trouble getting a project done this weekend, a heart shaped box with a cover that slides down over the box. Things didn’t fit as I thought they would. Is there a...
View ArticleProbe Issue XXL
@bffontaine wrote: Good Morning, I’ve installed my probe this morning and follow the steps in the guide and after I hit the probe button the program says there’s an error. Running CM4 Grgbl1.1 control...
View ArticleClik here to view.
Has anyone tried this vice?
@GJmakerspace wrote: Curious if anyone has feedback on the vice? Leading Edge Industrial Leading Edge Industrial's Shop: Product - Low Profile Vise Leading Edge Industrial's Low Profile Vise. Perfect...
View ArticleClik here to view.
CNC Finger Joint Box
@WillAdams wrote: Working up a tutorial on this here: https://www.shapeoko.com/wiki/index.php/CNC_Finger_Joint_Box First step is to create the box itself: cnc_box_fingerjoint.png1274x765 4.77 KB This...
View ArticleClik here to view.
SUP hanger modification project
@Tem wrote: Hi, I just installed and tested a Stand Up Paddle board storage system modification. I added a hanger to each end. This cleared up a bunch of space below the board, the board was a bit of...
View ArticleMilling cast aluminum
@Mysteryck386 wrote: Newbie here, first post… So my question is, do i need any special bit to mill a cast aluminum plate from an amunition reloading machine a friend of mine has. It’s current...
View ArticleGaining Z depth during job?
@Croy9000 wrote: I have been plagued with my XXL randomly gaining Z depth during the job. Rechecking my 0 above the workpiece after a failure usually shows the axis off (too deep) by .5mm or more (20...
View ArticleCarbide Create Simulation Problem With Paths Fading Out
@Isolocin wrote: So the problem I am having is when I simulate art work lately it seems like the paths are faded out in some spots. I know it’s not an artwork issue because the file in question right...
View ArticleHow to fix bumps on railings
@dukez0ne wrote: Hey guys. I finally got xxl and done with installation but im having hard time fixing the bumps on my railings both x and y. Any tips is greatly appreciated. Thanks! Posts: 4...
View ArticleV Carve Depth of Cut in Create
@VikingCO wrote: Does anyone have a good way to modify depth of cut (DOC) for V Carving in CC? My current project is only .26" thick and the bit is going through in large “vacant” areas. Thanks....
View ArticleClik here to view.
First pass cuts wider than the rest
@pw8 wrote: Finally decided to give my machine a go at tramming/squaring. I never really did it after I set the machine up. I ran a test cut using a .25 endmill to see if there’s still any scalloping....
View ArticleHow can I convert a PDF of the SO3 waste board to dfx
@Gerryattrick wrote: I would like to convert the PDF file of the waste board on the wiki to a dfx to get it cut on a commercial CNC machine. Is there an easy way to do this? I have F360, and Inkscape...
View Article