Clik here to view.
Magnetic Probe Assembly With Pictures
@Jas0n wrote: Hey All, I was inspired by MrBeaver’s magnetic replacement of the alligator clip on the probe and decided to make my own version, details below if your interested. I love magnets......
View ArticleMore z axis issues
@krvz wrote: My jobs have been very reliable lately, although been working in 1/4" stock with 1/8" endill mostly. Was trying a new project today, had to restart the job a couple of times because of...
View ArticleClik here to view.
GRBL Board - Nomad/Shapeoko Switch plugs
@wolfkabal wrote: Just curious, I had my panel off the other day to route my air line, and while in there I took a look at the grbl board. Always curious, I took some pictures to get a better view....
View ArticleClik here to view.
Tiny Dovetails weekend projects
@mrcaland wrote: Some weekend projects. Tiny Dovetails, cut with tiny end mills. 20171111_193821.jpg2112x3756 2.57 MB 20171111_193740.jpg3756x2112 2.26 MB 20171111_193726.jpg3756x2112 2.33 MB...
View ArticleCheap Test Materials (not MDF)
@Adam_Xett wrote: I have a lot fo 1/4" MDF and hardboard that I usually use for all my test cuts, prototypes, etc. However it all just beats the mills to death and the dust is really horrible stuff....
View ArticleShapeoko Touch Probe causes Door Open Error
@markmoran wrote: I just updated to CM4 (4.0.410 is the one it just installed) in order to use my new C3D probe. The probe seems to work mechanically (LED is solid green until the clip makes contact...
View ArticleChange Shapeoko size in CM4?
@markmoran wrote: I just expanded my SO3 to XL and upgraded to CM4 at the same time. The jogging and homing all seem to work so far, but the size of the XL is set to 830mm instead of 850mm, leaving...
View ArticleFinished XXL setup, can't home, limit switch issue?
@aarongblack wrote: I just finished setting up my new XXL and connected the machine to my laptop. I go into Carbide Motion and go to the MDI module and enter the phrase “type $22=1 to enable homing,...
View ArticleCarbide create tool error . And ,
@Michaelnilsson wrote: Hi. When adding new tools i cant input decimalpoints. It seems the software wants me to input points or commas but when i do they instantly turn red and i cant save the tool. Is...
View ArticleClik here to view.
Use Touch Probe for double-sided milling?
@markmoran wrote: I just received the C3D Touch Probe and am interested in using it to make two-sided milling easier. Is it possible to have CM4 probe a corner other than the bottom left one? I would...
View ArticleClik here to view.
YAMPA (yet another magnetic probe assembly)
@tito wrote: Ok–nothing really new here, just some specifics. I’ve been using the probe for a week or so now with my Nomad and I’m finding that I’m not a big fan of cipping the alligator clip to the...
View ArticleChanging Spindle
@jordanhale wrote: I currently have the Dewalt Router for the XL and thinking about getting a water cooled spindle. What are the differences that I will see? Faster? Posts: 3 Participants: 3 Read full...
View ArticleClik here to view.
Zrn coated cutter in europe? (Similar to those on Carbide3d)
@morten_denmark wrote: Hi I can see that a lot of you guys, like the Zrn cutters from Carbide3d for cutting aluminum. These cutters: shop.carbide3d.com #102Z .125" Zrn Coated Flat Cutter (Qty 2) These...
View ArticleIllustrator files and NOOB here: Basic Question
@bluepurplebananas wrote: Hi, I’m trying to engrave an object and I have the files worked on illustrator, saved as an SVG. When I open the file on Carbide, several of the text are highlighted in a...
View ArticleUniversal g code sender
@Oakley wrote: hey new to cnc im trying to do inlays and realized that v carve software seems to be the way to go. from what i have been reading you need a g code sender. how do you download a g code...
View ArticleClik here to view.
Make what you need category...billet j-tech laser/fan mount
@Griff wrote: My second aluminum project. Not beautiful nor polished but it does the job. The printed mount I bought with the laser didn’t survive a week. The 1/8” Baltic birch ply I cut lasted a few...
View ArticleClik here to view.
Error 28 generated
@krvz wrote: Trying out the male portion of an inlay this evening. GRBL generated in Fusion360. The run got to 12.8% then quit and generated this error. Any thoughts? IMG_7000.JPG2851x2138 2.05 MB...
View ArticleArticle on Fusion 360 CAM feeds and speeds and G-Wizard
@WillAdams wrote: Might be helpful to folks using the twain: https://www.cnccookbook.com/fusion-360-feeds-speeds-made-easy-g-wizard/ Posts: 3 Participants: 2 Read full topic
View ArticleCompletely new - potentially using CNC to produce test samples
@ChrisK wrote: Hi All - We produce specialty epoxy compounds used as adhesives, potting compounds and coatings for specific OEM applications. We presently mold parts for mechanical, thermal and...
View ArticleMounting controller box
@Boothecus wrote: Because of a lack of space, I had to mount the controller to the wall rather than to the y rail. Does anyone see any issues that might arise? Two things I thought of were grounding...
View Article