Clik here to view.
Am I the only Italian Shapeoko Owner? :)
@valda83 wrote: Just a curiosity..... do any Italian own a Shapeoko? At least.....European? D Posts: 3 Participants: 3 Read full topic
View ArticleLeveling entire waste board area
@JeffWimer wrote: Attempting to create a 36x36 acrylic sign on my XXL. I want to ensure the waste board is level across the entire surface. I realize that my cutting area is approximately 30x30, but...
View ArticleSparkfun Shapeoko not working with Carbide Motion
@tobeedelafuente wrote: I bought the Shapeoko Deluxe Kit from Sparkfun: https://www.sparkfun.com/products/13882 I was able to make it work with the Universal GCode Sender. But when I try to use the...
View ArticleClik here to view.
My Slightly Improved Setup
@JamesC wrote: prntscr.com Screenshot Captured with Lightshot This setup is easy to work with, and easy to clean the machine when I'm done Posts: 5 Participants: 3 Read full topic
View ArticleClik here to view.
Would like to buy a 2nd hand Nomad 883 PRO in Europe
@steveraf wrote: Everything is in the title Thanks. Posts: 1 Participants: 1 Read full topic
View ArticleMeshcam Question on stock thickness
@Blackjack wrote: I am trying to cut a part out of stock that is thicker than the part. Stock thickness is .50 the part is .46. I would like the part to be cut so that the bottom of the part is same...
View ArticleClik here to view.
Taming tear out on a V carving
@JFischer911 wrote: Hi All,I'm trying to perfect a logo I'm working on for a project and I think I'm about there. I'm really happy with the effect I get with the two layers of veneer on top of the...
View ArticleCNC Cookbook Readers Choice Award
@patonclover wrote: Hearty congratulations to Carbide 3D / Shapeoko. You have almost swept the pool in the CNCCookbook 2017 CNC Router Readers Choice Award by being #1 in 7 of the 8 categories. Posts:...
View ArticleClik here to view.
Timber Case - Made with Shapeoko, Kickstarter Launched
@irr1449 wrote: Hey Everyone, I launched my Kickstarter today for my wooden & 3d printed case. kickstarter.com Timber Case - A Wooden & 3D Printed PC Case Anyone Can Build An open-source line...
View ArticleDouble click on single click
@NinjaLlama wrote: Has anyone experienced a double click when trying to single click? i.e. In jog mode I click a direction once and the machine moves twice the selected distance. It is really annoying...
View ArticleShapeoko crashing when tunring off spindle
@starzen wrote: have been using my shapeoko for a while now and today twice it seemed to go into nirvana right after turning off the spindle. of course this happens right after doing a 4 hour 3D...
View ArticleDewalt router speed (rpm)
@donc wrote: the dewalt router runs way to fast for a end mill // is there a way to slow it down? Posts: 2 Participants: 2 Read full topic
View ArticleClik here to view.
For Sale - Nomad 883 Pro + Accessories - KY - $1800 (FREE SHIPPING)
@thefancypigeon wrote: Selling a practically new Nomad 883 Pro + Accessories. Machine has less than 5 hours of run time on it. I bought the machine to expand our business product line, but others took...
View ArticleClik here to view.
Engraving on gun/ gun slider
@Gimpsta16 wrote: Hello I am new to the whole cnc life/ hobby. I'm looking to start engraving on gun sliders and grips. Is there a way to import an outline of some sort to carbide create so I can lay...
View ArticlePage up/down on keyboard stopped working for z axis
@kdur wrote: Page up and down was working fine for moving the z axis in CM but has now stopped working. I did the latest update of CC. Could that have any effect? Has anyone else experienced this?...
View ArticleMeshCAM showing machining top of stock when Geometry Only is selected
@sjn1892 wrote: HiI've been using this for a while now but recently came across a little problem not experienced before. When creating the cutting file, the preview of the toolpath is indicating that...
View ArticleHow do I use Boolean cuts to do this
@TREC_Brett wrote: I want to erase the outside portions of the circles only leaving behind the parts of the circle on the inside of the hexagon. I used MSPaint to draw what I mean: BEFORE:...
View ArticleXXL, Problems homing - help!
@kfoisy wrote: Hi, After several months of delay, I finally completed assembly of my Shapeoko 3 XXL. Following the instructions, I successfully connected and turned homing on. Then I tried to do an...
View ArticleClik here to view.
Thread milling tests
@liyanage wrote: I bought a thread milling cutter from Lakeshore Carbide and did some tests on a Nomad classic with Fusion 360 in reshape and aluminum. It worked out great, with some help I got on the...
View ArticleClik here to view.
Nomad aluminum feed/speed tests
@liyanage wrote: I did some feed/speed tests with 3 different cutters (all at 9200rpm): 1.) 1/8" 2 flute ZrN coated from Lakeshore Carbide (item # 350018XRF) 2.) 1/8" 3 flute TiCN coated from Maritool...
View Article