Shapeoko v-wheels
@aidassim wrote: Hi, I wanted to ask is it possible that stock shapeoko v-wheels degrade in less than a month or could it be problems with a rail? There is lots of small black parts left on the x-rail...
View ArticleCarbide Create work area and adding non C3D cutters
@Lewscrew wrote: I finally opened CC to try to create a work path to tram my spoil board work area of 33x33. I am only able to create a 32:"x32: work piece I am not able to add a 1 1 /4" square...
View ArticleClik here to view.
Help with vCarving a sign
@volcom1niner17 wrote: Hi there I have not yet attempted to vCarve and am wanting to make a sign. Can anyone assist? Make a file for me or teach me how it would be greatly appreciated....I have the...
View ArticleClik here to view.
Shapeoko made ukulele
@burgchevap wrote: This is a soprano ukulele that I made almost completely on the Shapeoko. The main body, neck, bridge and soundboard were machined by me while the rest of the parts were purchased...
View ArticleNomad 883 in Sweden
@a00andos wrote: Hi There! I would like to come in contact with a owner of a Nomad 883 (or similiar) in Sweden, preferably near Gothenburg!I would love to take a look at the machine before purchasing....
View ArticleHow do i use the Edge Finder?
@Japmaco wrote: I bought the Edge Finder with my Nomad Pro. As i thought it would make things a Little more easy to align etc. But how do i use it? =) Posts: 5 Participants: 3 Read full topic
View ArticleClik here to view.
Error "Machine parameters are invalid"
@Japmaco wrote: I just got my machine, inserted a mill with less then 2inches sticking out, homing Went ok but after tool height calibration it came with this error?Any ideas? error.jpg1920x1200 198...
View ArticleSome ideas after 10mins after unpacking
@Japmaco wrote: Its a rigid machine no doubt. I just see some things that not really smart. Should have some sort of removeable tray under the machine to get those cuttings debrie out easy Would prob...
View ArticleMDI + Jogging please
@UnionNine wrote: @robgrz I would love to be able to use MDI along with the jogging in order to enter relative locations to check my zero on difficult work pieces & fixture setups. TL;DR: Please...
View ArticleClik here to view.
Help with cutting circle frames
@MrHume wrote: Hi Everyone,I'm trying to make a bunch of circular picture frames, and am having trouble. It's an incredibly simple cutting program, and I've done it with success several times, using...
View ArticleClik here to view.
Grill Master Sign
@ShallowCreekHill wrote: First time with a really detailed file right out of V-Carve! Made a few to sell on etsy after the first one. IMG_6983.JPG3264x2448 2.17 MB Posts: 1 Participants: 1 Read full...
View ArticleClik here to view.
Made myself a Salt N Pepper Holder
@MrBeaver wrote: Screen Shot 2016-11-17 at 19.09.53.png2880x1800 1.59 MB IMG_5610.JPG1536x2048 600 KB IMG_5609.JPG2048x1536 886 KB I made this in Fusion 360, however have had a strange occurrence. The...
View ArticleShapeoko belt slips when doing rapid positioning to the far left
@rnelwan wrote: I'm wondering if this is normal but doing a "Rapid Positioning" on a new session (right after turning on the shapeoko) causes the belt to slip when positioning the cutter to the far...
View ArticleZ and y axis not working properly for Hello World
@Merv100 wrote: Hello all Just received my SO3 yesterday and finished assembly today. Tried to print the hello world first project. Moved marker to the bottom left corner of paper, jog +z axis to just...
View ArticleShapeoko 3 XL Setup help
@austinious wrote: Okay, I've looked all over, and I've seen conversations started and half finished on this topic. I just got a regular at home and it's perfect. No problems whatsoever. However, my...
View ArticleXXL Size Question. Max Z height?
@shelbycharged wrote: Hey All, Sorry if this question has already been answered. I am designing a work bench for the XXL and wondered if anyone can confirm the dimensions on the sales page? My concern...
View ArticleClik here to view.
SO3 Removable front extension table
@Lewscrew wrote: Starting a new thread on my removable front extension table for the SO3. The picture is from my stock SO3 prior to my XXL upgrade. I also modified the straps to allow for a...
View Article90°V bit help loading
@volcom1niner17 wrote: I try to load a 90° bit into the tool library and when I type in 90 for the degrees it shows up red and won't load any tips? Posts: 5 Participants: 3 Read full topic
View ArticleConfiguring my Shapeoko2
@ricand wrote: I've figured out how to configure the x-y-z axis direction, but I can't get the distances moved correct. I though the default for steps/mm was 40.02 and 320 for Z. When I put my caliper...
View ArticleOnline feed+speed calculator
@mikep wrote: Ran across this feed and speed calculator, seems to provide reasonable results, and it pretty easy to use (all things considered). Doesn't seem as powerful as GWizard, but does produce...
View Article