Clik here to view.
Wedding Cake Topper
@timtom1 wrote: So I've been asked to produce a wedding cake topper on my nomad. But its not cut all the parts out. I'm using a 0.125" ball end and a 0.63" ball end for finishing. Heart 2.STL (442.4...
View ArticleNeat Fusion360 Plugins
@mikep wrote: For those of you using fusion360, you might find these helpful. They haven't been added to the "fusion 360 store" so you need to install them manually. Fusion360 plugin for converting an...
View ArticleClik here to view.
V mill in CC previews as a flat endmill
@Able wrote: I added a 90 degree v mill to my tool library but it previews the cut as a flat endmill. You can see in my picture the angle, diameter, and flute length are correct but every time I try...
View ArticleClik here to view.
Linoleum Stamp: Better Settings?
@TommyBBQ wrote: Hi All, I've been using a Nomad 883 for about a week now. All previous jobs were completed using Carbide Create and Carbide Motion. But for this one, I used MeshCAM and manipulated a...
View ArticleWill the Shapeoko XXL rust if left in the garage or patio?
@rnelwan wrote: I don't really have a workshop and can't keep the Shapeoko XXL indoors. I've built an enclosure for it but it's not airtight and leaving the entire setup outside is the only option. So...
View ArticleStuck on first step of ShapeOKO 3 assembly
@MikeFairbanks wrote: Sorry for the really noob question, but I cannot find the leveling feet that are to be attached to the end bars. Can anyone send a pic of the leveling feet? This is the smallest...
View ArticleCan anyone recommend a better set of assembly instructions for the smaller...
@MikeFairbanks wrote: I'm finding the online instructions to be missing a few things. I was wondering if there is a more complete set of directions or video tutorials in order to complete the assembly...
View ArticleMelting ABS with small end mill
@AlanCart wrote: Hi all, I am having trouble cutting 1/8" ABS with a small end mill (1/16" TiN coated carbide square end mill). I normally cut ABS we a feed rate of about 1300 mm but because this...
View ArticleReading inches instead of MM
@Murdocjx wrote: Anyway to get CM to read inches instead of mm. I do CAD in inches and it would be nice not to have to convert all the dimensions to mm Posts: 2 Participants: 2 Read full topic
View ArticleDxf file of nomad bed
@sshwarts wrote: Is there available somewhere a dxf file of the nomad bed? Not that's it's that hard to measure... Also the sea of holes plate would be handy as well in dxf. Thanks Posts: 4...
View ArticleCircle problems
@dragon1430 wrote: I've been running a bunch of jobs recently and I've started to notice that my machine doesn't seem to be cutting perfect circles like I need it to. Anyone know what might be the...
View ArticleSoftware will not open when downloaded
@santa wrote: I tried to download software but it would not open Posts: 8 Participants: 3 Read full topic
View ArticleClik here to view.
Are router burrs usable as endmills?
@chaunax wrote: I'm seeing router burrs on sale, such as this one from drillman1: www.ebay.com 10 0.90mm (.0354") DIAMOND CUT CARBIDE ROUTER BURRS, FT Kyocera Tycom | eBay They are 0.90mm (.0354”) in...
View ArticleClik here to view.
Weekend Project #5: Carbide KEYcore System
@ApolloCrowe wrote: Im really excited to share this project with the Carbide 3D Community.Its still amazing to me how quickly you can go from Concept to Real parts with the Nomad and Carbide Create....
View ArticleClik here to view.
Shapeoko 3 Wiring a solid state relay & probe
@ukman wrote: Anyone using a solid state relay with a shapeoko 3?Iot Relay www.amazon.com Iot Relay - Enclosed High-power Power Relay for Arduino, Raspberry Pi, PIC or Wifi, Relay Shield The IoT Relay...
View ArticleClik here to view.
Random Tolerance/Calibration Issues
@jpotter wrote: Calibration Test.jpeg4032x3024 2.21 MB Ok, first off, I've re-tightened all belts, and checked all set screws and still having issues. I am attaching a picture of some simple shapes I...
View ArticleClik here to view.
CC Missing line when importing DXF file
@bjinko wrote: Shapeoko XXL and after doing a few tests and fiddling with the setup to get better tolerances I'm now ready to do my first real project. So I've made a complete 3D model in Catia V5 for...
View ArticleAffordable 3D cam software for hobbyists
@dragon1430 wrote: I'm a highschool engineering student and I can't really afford to purchase something like meshcam. I've been extremely successful with 2D/ psuedo 2.5D machining using Inkscape, CC,...
View ArticleClik here to view.
How To: Custom Business Cards
@atrueresistance wrote: A friend needed some custom business cards. In this tutorial I'll show you how to complete this using a laser (3 Watt NDB7875) and v carve pro. I used version 6. The specific...
View ArticleXL aluminum extrusion
@atrueresistance wrote: If someone is scrapping their XL longer extrusion piece I'd consider buying it off you before throwing it. Posts: 1 Participants: 1 Read full topic
View Article