Xxl for sale including laser and dust boot NJ
@ukman wrote: Selling XXL with dewalt router (very little use) Jtech 3.8w laser and dust boot. All in good working order. Located in Keyport New Jersey. I am not shipping or parting out, may be able...
View ArticleClik here to view.
Beginner Struggling!
@norasaad wrote: Hi there, I’m looking for a holder for my brass stamp. When I purchased the Low Profile Vise I thought it will do the job, but when I got it I understand that’s just wrong. So I...
View ArticleCover plate over upper Z-Axis pulley?
@reibuehl wrote: Hi all, I have a Shapeoko 3 Sparkfun Edition. When trying to mount a Suckit Dust Boot, I noticed that my SO3 seems to be missing a cover plate that sits in front of the top Z-Axis...
View ArticleClik here to view.
Upgrading to Newest Z-Axis Tensioner
@danieleglenn wrote: I am starting this as a new topic because while I have seen other topics dealing with Z-Axis tension, I have not seen any topics about doing a complete retrofit of the Z-Axis...
View ArticleProblem with g-code generating
@szymon092 wrote: Hi, Recently I had tried to generate g-code file using Carbide 3D Create. Everything is fine but not with g-code file. I think that it is a problem with generating g-code file. When...
View ArticleProblems with saving Tool Path Files and Simulation
@PerezWoodworks wrote: Hello Carbide Community! I recently received and got my Shapeoko 3 XXL all assembled and have ran the hello world tool path and a few other practice pieces with great success!!...
View ArticleClik here to view.
Automatic Vacuum Switch
@patofoto wrote: Hello everyone. I’m looking into switching my vacuum system automatically on and off. I’m thinking of this: amazon.com Amazon.com: Iot Relay - Enclosed High-power Power Relay for...
View ArticleVacuum Hose shortening
@Tem wrote: I have a Fein Turbo 1. I ordered a second hose to cut the existing vacuum house down to length so that the distance between the Dust Deputy and the Vacuum are less, while still having a...
View ArticleD-Sub Connector Cutouts
@Doggitz wrote: Please bear with an absolute noobie. I build a lot of electronic projects and want to use my Shapeoko 3 to cut thin (.125 inch) electronic panels to mount connectors, switches, etc. I...
View ArticleClik here to view.
Lake superior cut-out on the back of this pendant i made
@Rasser00 wrote: lakependant01.jpg932x960 131 KB Posts: 1 Participants: 1 Read full topic
View ArticleAnyone want to get rid of a suckit dust boot?
@Prophoto25 wrote: Looking to buy one and need one fairly quick. Any comparable designs that don’t move with the z axis? Posts: 1 Participants: 1 Read full topic
View ArticleCan I get source code of Carbide Motion
@intijk wrote: I kind of want to use my carbide as a drill machine. Carbide motion main interface has all the fancy movement control, but the rotate speed is limited, could I get the source code and...
View ArticleClik here to view.
Engrave/v-carve issue
@micphigoo wrote: My engravings have been terribly ugly recently. As you can seeing the pictures, the corners of the “D” went deeper as it went Z+. Also the right leg of the “A” and top, those are...
View ArticleClik here to view.
Clamping Kit/stuff I use
@mikep wrote: Here’s the majority of clamping kit of stuff I use all the time with my machine. The Suckit “oops” clamps just replaced some other rockler sourced camps. There are a few other clamps,...
View ArticleClik here to view.
Something is off on my Shapeoko 3
@mwerks wrote: Not sure if I’m doing something wrong or I have a setting off. Searched for others having my issues and nothing seem to help what’s wrong with mine. I have a 3rd party Z-Axis assembly...
View ArticleMachines shipping now with GRBL 1.1 on the board?
@EvanDay wrote: Can anyone confirm this? Someone mentioned in the Facebook group that they called support and was told that they come ready to go for CM 4. I’ve obviously already got a machine and...
View ArticleClik here to view.
Splintering wood - what to do differently?
@MaxamillionX72 wrote: I have some cedar I recovered when we changed the siding on our house. I want to use it for projects, so I made a panel and tried cutting some coasters on the cnc. I got a lot...
View ArticleFeature request: Move around the x-y perimeters of a job
@idank wrote: This is something that I’ve seen on a laser cutter recently and found extremely useful. You load the file and press “Frame”, the gantry then moves to draw a frame around the perimeters...
View ArticleAny Shapeoko owners in Vancouver, Canada?
@Jkanzaki wrote: As the title implies, curious to see how many people in vancouver canada own a shapeoko. It will be nice to get to know each other locally. Cheers Henry Posts: 1 Participants: 1 Read...
View ArticleShapeoko XXL - Can't connect to cutter
@rvs0002 wrote: Can’t connect to cutter in Carbide Motion but I have blue lights on connection box, my laptop sees the usb connection, device manager says my Shapeoko device is working properly. I...
View Article