Touch Probe Running on Origional Nomad Classic 883 S/N00046 :)
@1st_Kiwi_Nomad wrote: Thanks to Jorge for all the help with the small mods to make it work :)!!! Posts: 1 Participants: 1 Read full topic
View ArticleBuilding a really simple car
@eciramella wrote: Hi all! Leveraging some of the stock artwork within Carbide Create, I popped a 2D image into 3D space: In this video I talk through locator pins, depth of cuts, and some hints/tips....
View ArticleSparkfun Shapeoko 3 Probe
@Foggy wrote: Hello, Just bought a second hand machine and a newbie. Would like to add probing. Looking at the Stepoko hookup guide, it shows connections. Stepoko board I assume that I just connect to...
View ArticleProblems Centering a Part Precisely
@colinwarn wrote: Trying to do multi-axial cuts with the Nomad, which involves me having to flip a part on it’s various faces. The problem is, my attempts in trying to recenter the center of the bit...
View ArticleJumped on the wagon!
@Gski191 wrote: Went ahead and bought myself a Shapeoko XXL last night. Pretty excited from all the videos I’ve seen and everything I have read! In all honesty I have no set direction I am going with...
View ArticleZ Axis Slider from CNC4Newbie Review
@Savant_PCs wrote: This is not the most In-depth review but it is something to show it in use. I will have a more in-depth review once I have used it for some more serious jobs. Posts: 4 Participants:...
View ArticleFirst test job running perfect "except" it's half the proper size
@atrest wrote: As stated above, the job is running as expected except the size is slightly less than half size. Drawing is in inches, 8x6 inches. Shapeoko 3 is cutting 3 7/8in by 2 7/8in. Google...
View ArticleShapeoko 3 Control Box- Component check List
@SteamMaker wrote: Hi Guys, I am planning to remove my control panel from the X axis rail (16" model) and put all my equipment into a control box about 6 feet away to prevent any frequency...
View ArticleLots of Burrs on Cutting
@baricl wrote: I’ve been using my XL for a couple of months now. I’ve tried cutting pine, MDF, and plastic boards. Using mostly the 1/4 ’ and 1/8 ’ cutter. Seems like no matter what I cut I get lots...
View Article1/4 Baltic Birch Feeds and Speeds
@johnelle wrote: I had been successfully cutting ornaments from 1/4" baltic birch and then I started experimenting with raising the speeds because it was taking almost a day to do a single piece. Now...
View ArticleSimple Instructions To Run Job W/Multiple Tools With Motion 4.12
@baricl wrote: CARBIDE 3D USING MULTIPLE TOOLS with Carbide Motion 4.12 The machine will remember your last offset position even if the power is turned off Save your G Code as Multiple Files. One for...
View ArticleShapeoko XXL CAD file
@wchaiane wrote: Hi All, I had to model my Shapeoko XXL in CAD to see if my parts would fit. Thought I should share with you guys. Note: this is a simplified model. It is not an official model. Use it...
View ArticleV-Bit Contour Depth
@rex wrote: Having trouble generating the proper toolpath for a shallow depth of cut when using a V-bit to do a contour. In Carbide Create V-bit depth, on a contour toolpath, uses the max cut diameter...
View ArticleHoming (wiring) seems backwards
@SteamMaker wrote: I just installed a replacement grbl board tonight and when homing the Z axis moves first and wants to go throught the wasteboard. I double checked and am certain I hooked up the...
View ArticleClik here to view.
Project for a neighbor
@DanoInTx wrote: Hello Forum, Saw a post on my local neighborhood message board from a neighbor looking for some help in making a family crest. The project sounded fun so I replied and we went about...
View ArticleClik here to view.
Strange behavior, or did I do it wrong?
@jcummings wrote: See the screenshot, not sure why it’s offsetting the imported gerber so that it’s not on the copper sheet on the web application, but maybe I’m doing something wrong or? Screen Shot...
View ArticleSharing Design Files
@mwevre wrote: Is there a library where people have shared their Carbide Create files and you can upload/download? Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Need constructive criticism on a plaque
@EvanDay wrote: So I’m working on a plaque and I need some honest feedback and criticism. I feel like I’m really good at the “science” of using my SO3: Toolpaths, measurements, feeds / speeds, etc....
View ArticleHelp with Meshcam tool change workflow
@Blackjack wrote: I Started using Meshcam when I purchased my Nomad for 3d jobs and I have been using it with the XXL that I purchased last fall It has never given me a problem.I am planning on...
View ArticleHDU or Pink Foam Feeds and Speeds?
@SteamMaker wrote: I’m finally back up and running and testing out some letter cuts with pink foam. I have to get used to Create as I think it doesnt have HDU foam as a material option so I selected...
View Article