@rex wrote:
Having trouble generating the proper toolpath for a shallow depth of cut when using a V-bit to do a contour.
In Carbide Create V-bit depth, on a contour toolpath, uses the max cut diameter of the tool to generate the toolpath regardless of the max depth of cut I set (even though the cut diameter is now less). Is there a better way to set up V-bits for contours when not using the max cutting diameter?
60deg V-Bit Tool Library Settings:
Diameter: 0.5in
Flute Length: 0.88in
Angle (per side): 30deg
No. of Flutes: 2
Posts: 3
Participants: 2