Shapeoko 3 with photovcarve
@HONVAULT wrote: hello I’m new and beginner I have a shapeoko 3 of carbide 3d , a Mac OS Sierra and photovcarve software. but work nothing ,there are not compatible. Do you have a solution to my...
View ArticleSuperPID Router Power Switch
@tchad wrote: Hi all! This question is mostly about SuperPID, but I know a bunch of you use these, so I’ll start here and see if anyone has suggestions before heading to SuperPID forums (if there are...
View ArticleAnything I should do to prepare the Nomad for shipping?
@kjl wrote: I’m about to pack up the Nomad for shipping - I have the original styrofoam but not the box. I’m not super worried about that - I can put it in styrofoam ends, tape it up real good, and...
View ArticleClik here to view.
Laser for positioning?
@shelbycharged wrote: I was thinking of ways to try and set x/y as accurately as possible when my work piece might move or change, etc. If I were to mark a crosshair on my bed, and attach a very low...
View ArticleClik here to view.
The mother off all mills for aluminium milling (Nomad)
@Markus wrote: Folks, I tested another high end mill and want to share the fantastic results. The geometry is specially designed to lower the cutting force and I gave it a try. I can do DOC of 3mm and...
View ArticleBit changing shoe for suckit dustboot
@ItsDan wrote: People who have this may have gotten the notice, but Suckit now has a version of their dust boot that makes it easier to remove the shoe for zeroing or bit changing without raising it...
View ArticleChanging out the bit between jobs
@Jdander78 wrote: I’m new to CNC and I have a shapeoko XXL. How do I change a bit between jobs when the router doesn’t lift high enough to do so? Is there a setting that I’m missing that raises it up...
View ArticleClik here to view.
XXL baseboard threaded inserts
@krvz wrote: Now that I finished my storage drawers, it was time to upgrade the baseboard to add threaded inserts. Used a similar technique as several people here I had read before with flipping the...
View ArticleClik here to view.
My New Digital Watch
@DJOrigin wrote: Here’s my first project with my Nomad Pro. Just some quick cuts and engraving, but I’m very happy with it! Vwatch still 1.jpg1920x1080 582 KB You can see more in my video about the...
View ArticleNo movement on Z and X axis
@jeffm wrote: I am trying to get started with my SO3 XXL. Everything is assembled and I am trying to job the machine. I had started out in CM v4, but rolled back to v3 since I was having problems....
View ArticleXXL cutting area
@Dirtycamel wrote: So I finally finished putting my XXL together, then found my mistakes, fixed them, and got a successful World print. Impressed myself for only making one mistake - installed the Z...
View ArticleIdeas for Accomplishing Desired Piece (Eyeglass Frame Front)
@csobod wrote: Hello all. So, I finally have become comfortable with both my Nomad and MeshCAM, to an extent. However, I’ve got a bit of a problem I could use some help with. A couple problems,...
View ArticleClik here to view.
Anyone going to Maker Faire Orlando?
@orlrobinson wrote: makerfaireorlando.com Home - Maker Faire Orlando October 21st – 10AM to 7PM & October 22nd – 10AM to 5PMCentral Florida Fairgrounds & Expo Halls What is Maker Faire? …...
View ArticleClik here to view.
Build 308-Problem
@kdur wrote: Is it me or is anyone else missing the top of the page in CC after installing the latest build 308? Something’s wrong at the top. Tried rebooting and a new install. Still no luck in...
View ArticleLinear Z - CNC4NEWBIES - Anyone using?
@dtilton71 wrote: Wondering if anyone has installed a linear Z from CNC4NEWBIES on eBay? Several XCarve users on the Inventables forum are using them and are giving good reviews. If I go down this...
View ArticleClik here to view.
Enclosure, finally
@Adam_Xett wrote: Finally got around to completing a cap for my XXL stand. LED lighting, 3/4" material and a foil-faced rigid foam on the interior. I used a double-layer of 1/8" plexi for the window...
View ArticleOpinions Welcomed!
@Bjohnes wrote: Good morning from South Carolina! I am considering the purchase of a 48" x 48" machine and have started doing some online research. I would appreciate some opinions of you fellas in...
View ArticleClik here to view.
Nomad o Shapeoko for engraving Stainless Steel?
@Liza wrote: Hello, everyone. I´m new to this forum, my name is Liza from Monterrey, MX and would really appreciate your advice and opinion. I design and sell personalized (engraved) stainless steel...
View ArticleFeed and speed page not found
@rnelwan wrote: Getting a 404. Does anyone have a copy of this page? http://docs.carbide3d.com/shapeoko/feedandspeed/ Posts: 6 Participants: 3 Read full topic
View ArticleWish List Sticky Possible?
@relic wrote: Is there a wish list sticky anywhere? I would love to see the Font and grid entry stay until changed. Being an old fart, I use inches with a grid of 0.250 or sometimes 0.125. A default...
View Article