Clik here to view.
It's a box (finally)
@krvz wrote: Newbie progression post. As a followup to the problems with the Z plunging suddenly, thought I’d give the 2x4 box another whirl. Aggressively cleaned the Z V-wheels and double checked the...
View ArticleClik here to view.
"Door Open" (I have no door!)
@BoscoBob wrote: I am trying to run an urgent job. I have all of the g-code ready to go. Loaded up CM 4.0.409 and grbl1.1. Opened the g-code file and went to start jogging the unit. Here is what I...
View ArticleClik here to view.
Cannot center a small hole on a small plate - C2D 3.07
@Zoomer wrote: I cannot figure out why I am unable to center a .37" hole on a 2" x 2" nameplate. The hole wants to drill on the lower-left side of the plate even thought I have programmed everything...
View ArticleClik here to view.
Aluminum Machining Marks
@pdx_curious wrote: Looking for ideas on how to make some cleaner cuts. I created a little 1/4" thick widget to test my Aluminum cutting to see if I can improve my surface quality. The idea was to...
View ArticleClik here to view.
Assembly: X-Axis Sensor question
@45rpm wrote: I am putting together my Shapeoko and I am mounting the sensor for the x-axis. All the documentation images show the sensor mounted with the sensor head above the screw:...
View ArticleZ plate sticking in one region
@ElementOrange wrote: Just putting the finishing touches on my new SO3 XXL and hoping to try out a first run tonight. However, I noticed one potential problem with the Z plate on my machine: Moving it...
View ArticleCutting 0.55mm pure silver plate - Depth of cut issue
@JewelMiller wrote: Hi, I am using Fusion360 to design some very fine items. What I do is not very advanced, and 90% of the time I only do 2D contour or drill operations. The problem is, I have to...
View ArticleHelp...carbide Create
@Bill wrote: I have a shapeoko XL, and I am really frustrated with Carbide create and I cannot figure out why I can’t get anything I create to cut correctly. I am working on a sign, using a v carve...
View ArticleCarbide Motion 4 File Loading
@dmckee55 wrote: Hello, I am attempting to carve a lithophane photo as a gift for a friend, but I am having issues getting Carbide Motion to load the .NC file. The lithophane STL file was loaded into...
View ArticleCutting mirror image of file
@MP40cal wrote: Hello all, I am using this Shapeoko Deluxe for the first time. My local Middle School bought this machine and asked me if I could get it going. I am used to VCarve Pro software and am...
View ArticleClik here to view.
Best bits for wood detail
@DylanRose wrote: Hey guys, I’m wondering what would be the best bits for carving small detail in wood. Specifically, i’ve got a basic 90 degree V-bit that I was using to try to achieve an engraved...
View ArticleClik here to view.
Z-Axis Motor "Failure"?
@will_r wrote: I did a little looking through the forum and didn’t find my exact issue, but hopefully somebody has some ideas here. System setup (no goofy modes, all stock except for Suckit): SO3 XXL...
View ArticleNew style z axis plate
@Wannabe_Maker wrote: Anyone have this in fusion or solidworks? Posts: 1 Participants: 1 Read full topic
View ArticleCarbide Motion w/ Probe Feature Request
@gixxergreko wrote: Would love to see Carbide Motion 4 probe for angle of deviation (like Estlcam does) when using a touch plate (official Carbide 3D version or any other). This would certainly help...
View ArticleFogbuster coolant system
@WillAdams wrote: This was mentioned on Reddit and seemed promising: http://www.fogbuster.com/ Curious if anyone else has used it, or what their thoughts are. Posts: 7 Participants: 7 Read full topic
View ArticleClik here to view.
Dust Collector Hose Setup?
@tomburtonwood wrote: Hi all, Happy Monday! SO3, with dust boot and Powertec 1HP dust collector, 1 micron filter bag. so here’s the thing. i’ve been using the mill for about a month now. i had an...
View ArticleClik here to view.
Die Filer (Fie Machine) Project for the Shapeoko3 AND the Nomad
@RichCournoyer wrote: Here is a sneak peek: Files, drawings, and videos coming soon. IMG_6504.JPG3264x2448 1.53 MB Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Cutting tool for plastic
@Tomas_Svoboda wrote: Hello, where can I buy tool (what is it name of this tool), which is on the picture, for cutting the plastics at Shapeoko XXL? Thank you! Tom Cutting.jpg1586x882 132 KB Posts: 3...
View ArticleGoing to try cutting balsa sheet stock on my XL, any tips or tricks?
@jvl wrote: I’ve got some 1mm upcut endmills, intended for PCB I think, and a 1/8 collet for the DeWalt router. The stock I want to cut ranges from 1/8’ thick to 5/32" thick. I am planning to use the...
View ArticleClik here to view.
Nomad stuff from my trusty old 883
@Mark_Estes wrote: I have been using the Nomad to create a few items lately. Modifications to a hammond project case and a Acrylic lid , both for a digital scale project that hacks 4 bathroom scales...
View Article