Extra long cutter
@timtom1 wrote: Hi Is it possible to get the #101 .125" Ball Cutter and #111 .0625" Ball Cutter in over extra long lengths? as the wood I need to cut has a depth of 50mm? Thanks Tim Posts: 6...
View ArticleConsidering Shapeoko 3
@augerpro wrote: Looking to get my first hobbyist CNC and the Shapeoko 3 is top of the list currently. My uses will be primarily woodworking with occasional aluminum work. Couple questions: What...
View ArticleClik here to view.
Registration Pins Solution
@patofoto wrote: I wanted to share a way I found to be very effective and simple to do a flip job on a sea of holes bed. I found threaded pins in McMaster Carr to fit my 10-32 threaded bed. I use 1"...
View ArticleClik here to view.
Got my Shapeoko to run a full job! Made a bit holder
@MrBeaver wrote: I know this is a bit basic, but till now I've not been able to run my Shapeoko for any length of un-interupted time. However I can now, and to test the new board and axis I did 2...
View ArticleGT2 gear too narrow for belts
@DML wrote: Hi all. Just recieved my Shapeoko 3 today. I got to the point of attaching the belts, but one of the stepper motor gears is too narrow. Ive emailed support, but with it being a holiday...
View ArticleMeshcam S&F vs Doc S&F vs Gwiz
@rev66 wrote: Hey guys, Been gone awhile, as the world has kept me busy. Just popped back to do some cutting and after updating meshcam and what not I am noticing that the "Carbid wizard numbers, vs...
View ArticleEnd Stops Sapeoko3
@bobo wrote: Hi all and merry Christmas. I just finished assembly on my SO3, wonderful machine.While trying my first " Hello World ", I made jogging error and almost damaged my new machine. I would...
View ArticleG-Wizard for Beginners
@MrHume wrote: Bob Warfield, the creator of G-Wizard, has put together this incredible reference:G-Wizard Calculator Feeds and Speeds Examples for CNC...
View ArticleMounting option for drag chain at the side of the Y-axis?
@reibuehl wrote: Hi all, I need a wider drag chain than what I could put on the top of the Y-axis. The 20mm drag chains are just too tight for the USB cable, the power supply cable and the rather...
View ArticleClik here to view.
Growler carrier
@JeffWimer wrote: Finally got this one done, just in time for Christmas. Built in CC, had a struggle with alignment and no dog bones. Made about 4 prototypes to get here IMG_0661.JPG3024x4032 1.96 MB...
View ArticleZ zero changed mid job
@IanJohnson wrote: I was cutting a pocket in acrylic on my XL (bought 11/16) when about 20 minutes in it suddenly started cutting through the acrylic and several mm into the wasteboard. Originally the...
View ArticleNewbie - Just Ordered, A few question
@djbetterly wrote: So I just ordered my Shapeoko XL a few days ago and I have a couple questions. Is there anywhere near Nutley, NJ that I could see a demo of the unit? How do I determine what...
View ArticleA wishlist for Carbide Create
@WillAdams wrote: Working on a project which will integrate MetaPost and OpenSCAD and have a couple of wishes which would make this simpler: PDF import --- even if all that happened was running...
View ArticleClik here to view.
SO3 XXL - Calibration for belt stretch - inconsistent distances
@taltalim wrote: Happy holidays everyone! I've decided to start from scratch with the calibration of belt stretch in the X- and Y-axis, as my results are varying pretty wildly depending on the region...
View ArticleHelp for an old noobie
@grumpa wrote: I am buying the shapeoko 3 in 2 weeks and want to get my designing up to speed in the interum. I have sketchuo 2017, been using sketchup for years, very comfortable with it. I...
View ArticleWaste board holes and clamping solution?
@grumpa wrote: I won't have my machine for a few weeks and in the interum i'm ramping up my design process for cnc'ing. I've read several topics about noobie's frustration with finding waste board and...
View ArticleClik here to view.
Beer Caddy Shapeoko XXL
@PDG wrote: Made on my Shapeoko XXL for a friend. Designed in OnShape then imported into CC. IMG_4416.JPG3024x4032 2.18 MB Posts: 4 Participants: 2 Read full topic
View ArticleLimit switches not working?
@howellusn wrote: So I bought an XXL and have been using it quite a bit with vcarve pro and love it! The only problem I do have with it though is that I bought it with limit switches to make homing...
View ArticleClik here to view.
Paulk Workbench II - Designed on CNC
@Bonch wrote: I ordered the plans for the Paulk Workbench II and built it over the holiday. If you are interesting in the plans you can purchase them off the Paulk website. Paulk Workbench II Website...
View ArticleClik here to view.
Nexus 5x Dock build
@atrueresistance wrote: Milled a nice little purple heart and black palm dock for my new phone. Capture.PNG1043x1299 969 KB IMG_c03xbb.jpg768x1024 182 KB IMG_20161227_194541.jpg3225x2419 2.32 MB...
View Article