Clik here to view.
My first custom sign sale on etsy store
@ukman wrote: MY FIRST CUSTOM SIGN SALE ON ETSY STORE:grin:Nothing complicated but very satisfying.A huge Thank you to Carbide 3D for an awesome product and also to the forum members for sharing your...
View ArticleClik here to view.
Good Xmas Spirit?
@patofoto wrote: I decided to make Xmas gifts this year with my Nomad. I thought a good idea to figure out and practice a little bit of a setup that would allow me to work in factory line style. I...
View ArticleShapeoko 3 Sound Enclosure
@The_Researcher wrote: Greetings all I have created and uploaded a design of a sound enclosure for the Shapeoko 3. As to date i have not built it yet and in fact not been able to try the CNC yet but...
View ArticleMy Nomad is frustrating
@JamesC wrote: I produce a file with meshcam, then load it into carbide motion. Carbide motion reads it, and totally ignores my ZERO settings, and tries to make the piece off to the side, and in some...
View ArticleClik here to view.
Skull Mount....how much?
@Bjohnes wrote: I'm putting the finishing touches on this deer skull mount. This is an order from my wifes coworker for her son. Made out of Hard White Maple and finished with Pre Stain Conditioner...
View ArticleClik here to view.
Inside the line cutout dimensions/geometry dimensions over/under
@rayjneal wrote: I have a file I have cut roughly 100 times perfectly. The other day I set the machine up for a nearly 20 hour cut in Damascus. Once finished, I changed the machine setup back to...
View ArticleFeedback for Carbide 3D plus some questions
@shelbycharged wrote: So I just finished my build, and have some points to make and I hope the people from carbide listen. I'm not trying to come off as a jerk or anything but inform them of some...
View ArticleWhy are parts of this simple svg not loading in Carbide Create?
@chaunax wrote: I am working on an app to create svg files for boxes, parametrically based on height/width/length/thickness. Here's one of the output files: Box SVG It opens in inkscape and browsers...
View ArticleClik here to view.
Egg holder gift from Cherry
@Owen wrote: Trying to save money on presents this year. My mother-in-law-to-be keeps chickens and gets loads of eggs every day, so an egg holder seems pretty appropriate. Here's the design I put...
View ArticleClik here to view.
Just wanted to say thanks to Carbide support
@aharner wrote: I bought my Shapeoko almost a year ago. I am an experienced woodworker and I have done some machining, but CNC work was totally new to me. I had some projects in mind when I bought the...
View ArticleAnyone know where to buy the V-wheels for S3?
@CJNOMNOM wrote: One of our V-wheels cracked in half. Odd..... But now we can't use the machine! I can't seem to find the part for sale on the site, or anywhere that matches it. All the ones I see are...
View ArticleMissing feet in package
@sl_eng wrote: Got my Shapeoko 3 (standard, makita router) a couple days ago and discovered the worst nightmare of everyone excited to get a package: it was incomplete. Thankfully it's nothing big,...
View ArticleClik here to view.
Rabbeted box generator for Carbide Create
@chaunax wrote: I wrote a small app to create plans for rabbeted boxes on my S3. I wanted something where I could just type in the board thickness + width/height/length of the box I wanted, and have a...
View ArticleV carving a hammer handle
@Bjohnes wrote: I've been asked to carve an inscription on a claw hammer handle. Is there a way to make this work? I doubt there is much flat surface to work with. Thank you,Bill Posts: 4...
View ArticleThe Machining Process
@JamesC wrote: With every job I run, the machine plunges the tool into the part, then works it's way out.is there a possibility of working with the MeshCam guys to make the process start from the...
View ArticleClik here to view.
Made myself a Shapeoko house
@MrBeaver wrote: Whilst waiting on some parts for my Shapeoko I've been getting bored, so I decided to make a house for my Shapeoko. I came along this post which looked kinda cool. SO3: XXL...
View ArticleCarvey vs Nomad 883 Pro
@Transcendence wrote: Could someone tell me if (and why) they think that the Nomad 883 Pro is a better investment than the Carvey? I wanna know the pros and cons before I make a decision. Thanks...
View ArticleClik here to view.
Simple circle test on my new XXL
@Alex wrote: I've run about 20 cutting tests since I assembled the XXL last month and I'm having issues on the deeps of cut. Here are the numbers: Screen Shot 2016-12-16 at 9.00.31 PM.png301x691 37.1...
View ArticleLine where error occurred
@Murdocjx wrote: Please please please in the future iteration of CM add the G code line where either a limit switch occurred or any other error that stops the run occurred at. Posts: 1 Participants: 1...
View ArticleHow do I get my Shapeoko 3XL to work with easel?
@jeffreysalisbury wrote: How do I get easel to drive my Shapeoko 3? I can't seem to get the exported file to work with carbide motion. Posts: 6 Participants: 3 Read full topic
View Article
