Start job at a particular line of gcode?
@cody wrote: I had to pause a job for an extended amount of time, as such I just stopped the job. I know what line the job last completed. How can I resume the job at this point? Posts: 8...
View ArticleClik here to view.
ISP Pin 1 reference for v2.2 Carbide Motion controller PCB?
@jimidi wrote: Searched the Wiki and the web for Carbide Motion ISP Pin 1 designation... big fat zero in first brush. Do any of you have a cite for this pin designation? I find no reference on the...
View ArticleBuilding an enclosure with concerns of heat
@rnelwan wrote: Hi everyone, I just received my Shapeoko 3 XXL and I'm getting ready to build an enclosure for it. I plan on building it using MDF wood, however, I worry about the heat the enclosure...
View ArticleClik here to view.
SO3 XL upgrade assembly tips?
@lost57 wrote: I received my XL upgrade kit (box was huge) and I'm going to disassemble and put it together this weekend. Any tips/tricks/suggestions? Ed told me there wasn't instructions yet for the...
View ArticleClik here to view.
GRBL Error not again
@Blackyankeewood wrote: I keep getting this Error GRBL what does it mean what could be cause this. Screen shot attacted help please about ready to send the XXL back. image.jpeg3264x2448 2.9 MB...
View ArticleFeature request: retract spindle when using Rapid Position
@Cereza wrote: Broke my edge finder on first use... Posts: 1 Participants: 1 Read full topic
View ArticleCarbide motion "Spindle On"
@NinjaLlama wrote: What speed does the Nomad default to when I press "spindle on" in carbide motion? Can I adjust this setting? Posts: 3 Participants: 2 Read full topic
View ArticleCan't add a Vee Mill tool type in Carbide Create v288
@TravisGood wrote: When I try to add a v-carve tool I do the following: Edit Library Add Tool double click the added tool select Type: Vee Mill click OK The tool is saved but always reverts to Flat...
View ArticleGRBL error. Cutter not found
@Ken wrote: I have to admit that I'm "challenged" when it comes to this stuff. But my board has a blue light and nothing else. My computer doesn't even acknowledge the USB plug when I plug it in or...
View ArticleCopy and paste in CC
@JeffWimer wrote: Is there an ability in CC to copy and paste? I want to drill many holes in my spoil board for clamps. I hope I don't have to create every one of them. Posts: 5 Participants: 4 Read...
View ArticleZ Drive confirmation?
@jimidi wrote: I've got the X/Y specifics of the Shapeoko drive (stepper/belt pitch/pulley teeth), however looking at the wiki references I'm gray based on the content (or I'm missing it all...
View ArticleHalftone Software for Mac?
@patofoto wrote: Has anyone done any halftone images with the Nomad or Shaepoko?. I've found a couple of apps for PC but not for Mac.I know how to convert an image into a halftone and then into vector...
View ArticleClik here to view.
It's FINALLY HERE: WD40 Drip Can How to Video
@RichCournoyer wrote: Sorry this took so long...... NC Files are below I got so tired of wasting WD40, spraying way too much, or forgetting to spray, etc, so I created this simple little device. It...
View Article5% of project cut and then GRBL errors
@frank26080115 wrote: I tried to cut something pretty simple in 6061 aluminum, it seems to be ok 4 layers in and then suddenly I got an error pop-up, something about GRBL expected command letter....
View ArticleClik here to view.
I hate the Z but i need to show off :)
@iamthenewking wrote: hi I hate the Z but i need to show off i purchased my SO3 about 10 months now and here it is:) highend mod (personal vaporizer) 14374614_1330281120329950_1503434503_o.jpg1280x960...
View ArticleClik here to view.
Bearing pulley gouging the x axis beam
@JS_Stoezel wrote: Hi: A few weeks ago I got a Shapeoko Deluxe kit from Sparkfun. I've been assembling it under the supervision of my own support team of retired JPL engineers, a.k.a. Richard...
View ArticleKress 1050 on New Z plate
@Maverick wrote: I received my new z plate but after installing came to the conclusion that the Kress spindle doesn't stick that far out below the mount (compared to the dewalt). Resulting in a...
View ArticleGRBL Error (has anyone heard from support)
@Blackyankeewood wrote: Has anyone that has the GRBL Error heard anything back for carbide support. I have been waiting to hear back from them for four days now. Posts: 3 Participants: 3 Read full topic
View ArticleSteps per revolution?
@jimidi wrote: Can someone on the pro-team confirm this for me? Looking on the Wiki, I read the following statement from this page: http://www.shapeoko.com/wiki/index.php/About The stepper motors are...
View ArticleNomad 883, basically brand new, for sale
@nathan.h.cross wrote: I have a Nomad 883, that I just purchased in July, I would like to sell it for 2250. I have the box, and extra bits and wrenches. Please let me know, text 301-991-7892. Thanks...
View Article