Clik here to view.
Squaring failure
@Croy9000 wrote: I followed the guide about squaring my new XXL. Got the Y plates that attach to the X rail so they both contact the end plates perfectly and tightend everything down. Then checked...
View ArticleClik here to view.
Things I've been messing with
@Kat wrote: So, it’s been a while since I’ve been able to slow down and post. As it is said, life is what happens regardless of you’r plans. lol. A couple of small boxes, showing the lid, and a shot...
View ArticleClik here to view.
Interpreting circle diamond square test
@jhanna wrote: Please see attached results. Prior to running the test I have squared the frame by loosening / tightening rail screws method described in the wiki. The front of both Y plates contact...
View ArticleClik here to view.
Hedge your bets, what will a 50mm carbide cutter do
@MrBeaver wrote: IMG_20180406_194517.jpg2104x2805 1010 KB That tiny cutter below is a 30mm bottom bit… Posts: 3 Participants: 3 Read full topic
View ArticleClik here to view.
Persistent "lip" when doing profile cut with a v bit
@JFischer911 wrote: IMG_7130.JPG2253x1690 788 KB Hi All, I was wondering if anyone had seen this issue or had any suggestions for fixing it. I’m trying to cut several of these little (1" diameter)...
View ArticleClik here to view.
3 D picture in Spruce Pine with XXL
@jdg3 wrote: I made another 3D file and carved it out on the XXL. Its 9-3/8" tall by 24-1/2" wide by 3/4" thick. I use combinations of 3D software, and sources for files. I use thingyverse and other...
View ArticleHEPA Dust Extractor Comparison
@Lewscrew wrote: Here’s an interesting Read and video on HEPA Dust Extractors. This is not a Shop Vac comparison. Dust Extractors are different from Shop Vacs, so let’s keep shop vacs out of this...
View ArticleSpindle options electrical math
@EvanDay wrote: I’m reading and learning about the various aftermarket spindle options, but I’ve kind of hit a stumbling block. I’ve determined that I don’t want to go bigger than a 1.5 kW spindle, as...
View ArticleCarbide Motion 4 driver fail to install Windows 10
@Isolocin wrote: Hello, I am using a windows 10 laptop, its a crappy toshiba, my only computer ATM. I tried to install CM4 and it does the whole install process and the last part where it says its...
View ArticleCarbite Create Question
@Davidbb-Indy wrote: I am new to this software,I wanted to learn the software prior to purchasing a Shapeoko system. Is there a list of keyboard commands? In the video training it seems that he is...
View ArticleZ carriage will collide with the LEFT side X carriage
@Ton80 wrote: So I have been meaning to ask about this. Why is it that the machine does a homing routine and offsets the spindle 5mm off all the limit switch positions in the far back right corner and...
View ArticleWTB: Jtech 1W Laser Kit
@mikep wrote: I’m looking for a used gen3 or gen4 jtech laser kit - I don’t need anything larger than the 1W kit, but would consider others. Anyone have one they wish to find a new home for? Posts: 1...
View ArticleSuper PID and Autostart Vacuums?
@Jexoteric wrote: Anyone here that uses SuperPID and an auto-start vacuum, like the Fein Turbo I? Just wondering if they play nicely with each other or if SuperPID makes the auto-start feature...
View ArticleClik here to view.
Gcode Simulator
@baricl wrote: Anyone ever use either of these to simulate a cut job. The first one you copy and paste your code into the program The second one you just open your gcode.nc file...
View ArticleClik here to view.
3/8" collet for Makita
@WillAdams wrote: This was posted to the unofficial Shapeoko Facebook group: toolmarts.com Makita 763619-3 3/8 Collet for 3608B Description for 763619-3 3/8" Collet for 3608B will be available...
View ArticleCarbide Motion v4 homing
@olsonml wrote: Hi, I just updated the GRBL to 1.1 and Carbide Motion to 4.0.412. While doing my duty to follow directions I noticed that there is no “enable homing” button in the settings, like the...
View ArticleHoming Switch Kit assembly and installation instruction link broken
@spasmfingers wrote: On the store page for the carbide3D homing switch kit there’s a link to help documents to help with assembly and installation. The link is broken. Does anybody have the...
View ArticleHow Low can You Go?
@johnelle wrote: I wanted to do one of the Vectric free projects: wooden peg box Bought a 1-7/8" chunk of mahogany because it calls for 1-3/4 stock for the bowl part. However having really struggled...
View ArticleClik here to view.
SO3 XXL right Y-axis lub-dub
@BirchBear wrote: Hi all! I have completed assembly on my XXL. I have yet to fire it up. While double checking screws and movements I noticed the right Y axis seems to have a lub-dub to it, almost...
View ArticleClik here to view.
Consistent Z for relief but inconsistent for pockets. What went wrong?
@Ton80 wrote: I am looking at my recent projects and I am a little concerned about the quality of my pockets and the inconsistencies along the pocket floor. I thought maybe it was showing I need to...
View Article