Kokopelli --- MIT project
@WillAdams wrote: Came across this again and added it to the wiki in a couple of places: http://www.mattkeeter.com/projects/kokopelli/ See: https://www.shapeoko.com/forum/viewtopic.php?f=5&t=5133]...
View ArticleWhere to Find Topographic Maps
@jasonsd wrote: I see carvings of relief maps now and then. Either they are hard to find or I don’t know where to look but I can not find relief maps online. Either a 3d file or grayscale relief svg....
View ArticleJumping, thumping, burning
@aarongblack wrote: I’m doing cutouts using .19" pine luan. I switched from an 1/8th to 1/16th inch end mill (feed: 30, plunge: 20, rpm 21000, depth per cut .28. I’m having a couple of issues. During...
View ArticleUpgrading to GRBL 1.1 fails
@kazuma wrote: Hey Guys! So I recently upgraded my SO3 to XXL. Finished putting the thing together and I am stuck at the upgrading software process. I downloaded the CarbideUpdater, and I am stuck at...
View ArticleClik here to view.
Retro gaming wall art
@ItsDan wrote: Not 100% on how I want to finish this. I think I’m going to try putting ‘distressed’ pattern paper behind each cutout then finish the top layer with either a brown or black wood dye. I...
View ArticleClik here to view.
Wood Rosary Ring
@JDB wrote: Happy New Year everyone, Just finished modeling in Sketchup what will become my father’s bday present for this year. My Nomad is out of reach and I haven’t had the chance to run any tests...
View ArticleClik here to view.
Will this work on a Nomad? If so I would contract someone to try
@hardrockgarrett wrote: The grip is approximately 3" tall and half an inch thick at the middle. I’m just learning about CNC and looking to see if buying a Nomad is for me. I would want the project cut...
View ArticleClik here to view.
FOR SALE: Unopened/Unused Shapeoko XXL Kit w/Dewalt Router
@NickMathis wrote: Hello folks! This unopened/unused Shapeoko XXL Kit with Dewalt router was purchased May 2, 2017 for multiples of a commissioned piece that I wound up outsourcing instead of milling...
View ArticleTab removal in CC
@Blackjack wrote: I am working with the tab feature and placed a tab accidentally how do I delete it?? Posts: 6 Participants: 4 Read full topic
View ArticleManually editing gcode to resume large job?
@DMcCrone wrote: I’m looking to resume a rather large vcarve job I setup. I only completed 15% before I had to shut down for the night. I wrote down the line of gcode Carbide Motion was on (12482 of...
View ArticleClik here to view.
Some advise please
@thesignguy wrote: I have 2 issues I’m trying to address. I’ve had my XXL w/ the dewalt for about a year now, been playing with Aspire for about 6 months. 1st issue (see attached pictures) trying to...
View ArticleCarbide Create Simulation Gives Blank Screen?
@islandmaker wrote: Hello World - New to Create and my Shapeoko 3 XXL - and everything makes sense and is working fine. I’ve been a designer for a long time and have used CNC a bunch too. No problem...
View ArticleAnyone found any useful / interesting academic theses or other materials?
@WillAdams wrote: Recently came across http://www.mattkeeter.com/projects/kokopelli/ which grew out of the developer’s Master’s Thesis: http://mattkeeter.com/research/thesis.pdf so added a section to...
View ArticleZ slider, is it worth it?
@Savant_PCs wrote: I came across this while browsing another thread and as noob I have no idea if it would be worth it or not and why?...
View ArticleFor Sale (UK): Shapeoko 3 Standard + Aluminium Table + 10mm Belts + 1.5KW...
@nick wrote: Everything is in good working order. Has the new folded Z-Axis plate. Full set of ER-11a collets. (1-7mm) Selling so I can build my own machine. Collection near Guildford, Surrey (UK)...
View ArticleClik here to view.
New & upgraded linear Z - we're builders so lets build
@MrBeaver wrote: I saw a few posts about upgrading the Z axis and though it might be a cool upgrade. I have a large spindle that strains the springs a fair amount and when milling aluminium my Z belt...
View ArticleRe-Created a Super Small Cribbage Board
@MadHatter wrote: Someone was looking for a vintage super small portable cribbage board on reddit. I have never seen one like it before, but I decided to make one real quick out of wood. People seemed...
View ArticleClik here to view.
Jagged Toolpath in preview
@cooper136 wrote: IF the toolpath is super jagged it surely wont cut this way correct? It was just a standard cut, using the #102 cutting tool. Overall dimenstions of the model bridge are 12" x 2.5 to...
View ArticleClik here to view.
My review of the T-Track system
@Savant_PCs wrote: So another huge thank you to Shapeoko for sending me the T-track system for my SO3 XXL. I wanted to put it to the test today albeit I was quite nervous as I was modifying a...
View ArticleShapeoko Touch Probe availability when?
@nixman wrote: When are more touch probe be available? Posts: 1 Participants: 1 Read full topic
View Article
