Invalid GCode Error 33

@patofoto wrote:

Trying to simply carve some letters onto wood. It starts carving the B perfectly but then gives me an GRBL error in the middle. Could it be the font I'm using?.

Screen Shot 2016-09-10 at 11.07.11 AM.png3010x2192 1.21 MB

Screen Shot 2016-09-10 at 10.52.39 AM.png1800x1144 31.1 KB

FullSizeRender.jpg2448x2448 1.28 MB

Screen Shot 2016-09-10 at 11.26.59 AM.png1798x1144 103 KB

Beer.nc (64.0 KB)

It seems to fail at line 819. Is it related to the J0. It seems to be the first time this command with value 0 shows up. There are other J values but not 0.

Posts: 3

Participants: 2

Read full topic