@MrJoe wrote:
I made seven of these medallions on the Nomad 883, six for the race and one spare in case I messed one up.
The main part is made from red oak.
Colors were added with dye and fine paint brushes.
Then I sealed them with 3 light coats of clear polyurethane.I imported the logo for the race (designed by my friend Bill) into Vectric VCarve Desktop and used standard feeds and speeds to machine them.
The coins for 1st/2nd/3rd place were designed in Vectric VCarve Desktop and machined from brass using standard speeds and feeds.
Posts: 1
Participants: 1