@Adam_Xett wrote:
Having some odd issues on my small S3. The attached gcode causes my machine to stop. just… stop… at random points, and if I run the same code twice, it will stop at different points, never the same one twice. Sending with grbl panel, which gives unhelpful errors like “machine stopped responding”.
Any chance one of you can run this real quick as an air job and let me know if it runs? Smalll 4x6 dust boot, .75" of depth cut.
.25_Dust_Boot_v5.nc (21.1 KB)
Posts: 1
Participants: 1
